Filter
Top Products
4.10 Speakers 4 Replacement Procedures
TECRA S1 Maintenance Manual 4-43
Left speaker
Right speaker
Speaker cable
Speaker cable
M2.5x3.5 black flat-head screw
Speaker connecter
Figure 4-27 Removing the speakers
Installing the Speakers
Install the speakers according to the following procedures and Figure 4-26 and 4-27.
1. Connect the speaker cables to speaker connectors.
2. Place the left and right speakers in their correct position and push the speaker cables
into the guides on the top cover.
3. Restore the normal harness cover placement. Fix it with the M2.5x3.5 black flat-head
screw.
4. Turn the computer upside down, and secure them with the M2.5x6 black bind screws
(Two screws for one speaker).