Toshiba TLP261 Projector User Manual


 
68
Others
CONTENTS
Symptom
The remote control does not
work.
The presentation made cannot
be used from the remote
control unit.
Document camera image is
blurry.
Document camera image
flickers.
Cause
The remote control is not facing the remote sensor.
The remote control is too far away.
There is an obstruction between the remote control and the
remote sensor.
The batteries are exhausted.
The USB cable is not properly connected.
The computer or OS is not compatible.
The batteries are exhausted.
The lens is dirty.
The picture is out of focus.
The light is not on.
Image is being affected by fluorescent light in the room.
Correction
Face the remote control transmitter toward the remote
sensor on the projector.
Operate within about 5 meters.
Remove the obstacle.
Replace the batteries.
Connect the USB cable properly.
The remote control mouse function is not available.
Replace the batteries.
Clean the lens with a blower or lens cleaner, etc.
Focus the picture by turning the focus ring.
Turn on the light.
Set the shutter speed on the menu screen.
Page
16
16
15
41
15
64
57
56
45
Before calling service personal (continued)