Filter
Top Products
CONTENTS
40
Maintenance
If there is some problem inside the projector,
the indicators light up or flash.
Trouble indications
ON Off or lit (red)
LAMP –
TEMP –
The power does not come on.
→ Malfunction of the unit.
• Unplug the power cord and call the
dealer.
ON Lit (red)
LAMP Lit (red)
TEMP –
The lamp turns off or does not light up.
→ The lamp’s end, or malfunction of the
unit.
• Lamp’s life length is over, replace the
lamp with new one.
42
• Unplug the power cord and call the
dealer.
ON Lit (red)
LAMP –
TEMP Lit (red)
The power turns off or does not come on.
→ The inside is too hot, or the projector has
been working in an area of high
temperature.
• Place the projector correctly so the
intake and exhaust fans’ holes are not
covered.
• Turn the projector off, and leave it for
a while, and turn it on again.
• Clean the air filter.
41
ON Lit (red)
LAMP –
TEMP Flashing (red)
The power turns off or does not come on.
→ Trouble with the intake fan.
• Unplug the power cord and call the
dealer.
ON Lit (red)
LAMP –
TEMP Flashing (orange)
The power turns off or does not come on.
→ Trouble with the exhaust fan.
• Unplug the power cord and call the
dealer.
Note
Before attempting any maintenance, unplug the
power cord.
ON Indicator
LAMP Indicator
TEMP Indicator
ON/STANDBY MENU ENTER
SELECT/ADJUST
INPUT
ON
LAMP
TEMP