Filter
Top Products
19
Operations
→
→
→
Picture projection
CAUTION
Do not look into the projection lens while
operating the projector.
Preparation
• Install and connect the projector properly.
• Take off the lens cover.
Press ON/STANDBY.
Both the ON and LAMP indicators light up
in green.
Turn on the connected
equipment and put it in
playback mode.
Select the input source.
(On the control panel of the main unit)
Press INPUT repeatedly.
Each time the button is pressed, the
source indication on the screen changes
as follows:
1
2
(Continued)
4
5
Indicators
3
5 4
ON/STANDBY MENU ENTER
SELECT/ADJUST
INPUT
ON
LAMP
TEMP
1
VIDEORGB
AUTO SET
KEYSTONE
RESIZE
FREEZE
MENU
RESET
+-
ENTER
MUTE MARKER
CALL
ON/
STANDBY
1
3
On (Green)
Flashing (Green)
On (Green)
On (Green)
LAMP
ON
LAMP
ON
3
RGB: To project pictures from a
computer connected to RGB
INPUT or a video equipment
with component video
output jack.
Video: To project pictures from a
video equipment, etc.
connected to VIDEO jack of
VIDEO INPUT.
Y/C: To project pictures from a
video equipment, etc.
connected to S-VIDEO jack
of VIDEO INPUT.
(On the remote control)
RGB: Press RGB.
Video/Y/C: Press VIDEO.
Each time the button is
pressed, Video/Y/C is
switched.
Adjust the picture size by
turning the zooming ring.
Turn to the right to enlarge the picture.
Turn to the left to reduce the picture.
Focus on the picture by
turning the focusing ring.
A still picture is recommended for
focusing.