Toshiba TLP-T50M Projector User Manual


 
39
Others
38
CONTROL terminal
Pin assignment
7
8
6
3
4
5
12
Signal Name
RXD
CTS
DSR
GND
RTS
N.C
TXD
N.C
Pin No.
1
2
3
4
5
6
7
8
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h) No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
(ACK or NAK) before sending the next command.
Main Commands
Note
Contact your dealer for control cable and other commands.
Separately Sold Product
Replacement Lamp Model TLPLV1
Note
Design, specifications, etc. subject to change without notice for improvements, etc.
Item Command
Power on PON
Power off POF
OSD display on MO0
OSD display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Item Command
Computer input select IN1
Y/PB/PR input select IN2
Video input select IN5
S-video input select IN6