Filter
Top Products
25
Status Menu
This is a read-only menu for informational purposes. To display
the Status menu, highlight Status from the Main menu, then press
SELECT
.
FIGURE 20
Status menu
Lamp hours used
Indicates how many hours the current lamp has been in use. The
counter starts at zero hours and counts each hour the lamp is in
use. Replace the bulb when the brightness is no longer accept-
able. See “Replacing the Projection Lamp” on page 27 for details.
Computer resolution
Shows your computer’s resolution setting. To change this, go to
your computer’s Control Panel and adjust the resolution in the
Display tab. See your computer’s user’s guide for details.
Source
Indicates the active source, Data-Analog, Data-Digital, Compos-
ite video, or S-video.
Ver si on
Indicates the projector’s software version. This information is
useful when contacting Technical Support.