Toshiba TLP-470 Projector User Manual


 
CONTENTS
25
Operations
Operating the computer
by the remote control
If you connect the iREMOTE MOUSE
RECEIVER to the computer, the supplied
remote control can work as a mouse of the
computer.
Connecting the REMOTE MOUSE RECEIVER
Check that the power of the computer is turned off.
Connect the REMOTE MOUSE RECEIVER.
Remove the mouse actually used and change it to the supplied cable.
Notes
To operate the projector and the computer by
the remote control, place the REMOTE
MOUSE RECEIVER close to the projector.
When connecting the REMOTE MOUSE
RECEIVER to an IBM PC/DOS V computer,
use the supplied PS/2 mouse adapter if you
are using a PS/2 mouse, or connect the
supplied IBM/MAC cable directly to your
computer if you are using a serial mouse.
• When connecting the REMOTE MOUSE
RECEIVER to the USB PORT for the first
time, insert the “Windows98 CD-ROM” and
install the device drivers for a USB
interchangeability device and a USB human
interface devices (two kinds). The installation
starts automatically when you connect a USB
mouse cable connected to the remote mouse
receiver to the USB port of your computer.
(Continued)
USB
PORT
SERIAL
PORT
PS/2
MOUSE
PORT
MAC
MOUSE
PORT
USB Mouse cable
(supplied)
IBM PC
DOS/V
PS/2
Mouse adapter
(supplied)
IBM/MAC
Mouse cable
(supplied)
REMOTE MOUSE RECEIVER
(supplied)
MAC
Mouse adapter
(supplied)
PV-98 IBM/Mac USB
Macintosh