Filter
Top Products
2. SPECIFICATIONS
2.3 Receipt Roll
2-3
EO1-13019
2.3 Receipt Roll
Paper type Thermal paper rolled with the print side facing outside
Width (W1) 80 +/ -1.0 mm
Width (W2) 58 +0/ -1.0 mm (With optional 58 mm paper guide)
Outer diameter (D) 76 +/-2.0 mm
Paper thickness (T) 0.065 +/- 0.005 mm
Weight 53 g/m
2
Outer core diameter 21.5 mm
Inner core diameter 12.5 +/- 0.5 mm
Recommended thermal
paper
Only paper rolled onto a core is acceptable, however, the paper
end should not be pasted to the core. TOSHIBA TEC
recommends using the following thermal paper for this product
Manufacturer : OJI
Type : JFD210
CAUTION!
Use only paper which meets specified requirements. Use of non-specified paper may shorten
the head life of the printer, resulting in problems with print quality, cause a paper feed failure or
shorten the cutter life. All paper should be handled with care to avoid any damage to the paper.
Read the following guideline carefully.
• Do not store the paper for longer than the manufacturer’s recommended shelf life.
• Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct
sunlight, high temperature, high humidity, dust or gas.
• A contact of chemical or oil may discolor or erase the printed record.
• Rubbing the paper hard with nail or hard object may discolor the paper.
• The paper end should not be pasted to the core.
For further information please contact your authorized TOSHIBA TEC representative or authorized
paper manufacturer.
W1 or W2