Filter
Top Products
S-Registers
AT command set result codes
47
ERROR 4 Invalid command
CONNECT 1200 EC
*
5 Connection at 1200 bps
NO DIAL TONE 6 No dial tone detected
BUSY 7 Busy signal detected
CONNECT 2400 EC
*
10 Connection at 2400 bps
CONNECT 4800 EC
*
11 Connection at 4800 bps
CONNECT 9600 EC
*
12 Connection at 9600 bps
CONNECT 14400 EC
*
13 Connection at 14400 bps
CONNECT 19200 EC
*
14 Connection at 19200 bps
CONNECT 7200 EC
*
24 Connection at 7200 bps
CONNECT 12000 EC
*
25 Connection at 12000 bps
CONNECT 16800 EC
*
86 Connection at 16800 bps
CONNECT 300 EC
*
40 Connection at 300 bps
CONNECT 21600 EC
*
55 Connection at 21600 bps
CONNECT 24000 EC
*
56 Connection at 24000 bps
CONNECT 26400 EC
*
57 Connection at 26400 bps
CONNECT 28800 EC
*
58 Connection at 28800 bps
CONNECT 31200 EC
*
59 Connection at 31200 bps
CONNECT 33600 EC
*
60 Connection at 33600 bps
CONNECT 38400 EC
*
28 Connection at 38400 bps (DTE
rate)
Command Set Result Codes Table (Continued)
Result Code Numeric Description
* EC appears only when the Extended Result Codes configuration option is enabled. EC is replaced
by one of the following symbols, depending upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol