![](http://pdfasset.owneriq.net/c/0c/c0cb2ed8-1764-4eec-8db2-a6631d1683e4/c0cb2ed8-1764-4eec-8db2-a6631d1683e4-bgbc.png)
4.23 VGA Board 4 Replacement Procedures
4.21 VGA PCB
Removing the VGA PCB
To remove the VGA PCB, first remove the battery pack, keyboard, display assembly, and top
cover, then follow the steps below:
1. Disconnect the VGA PCB wire cable from the system board.
Figure 4-62 Removing the VGA PCB FFC cable
2. Remove the M2x6 screw securing the VGA PCB. Then remove the two hexagonal VGA
screws from the left side of the computer.
Figure 4-63 Removing the VGA PCB screw and the hexagonal screws
Satellite X200/ X205 Series Maintenance Manual
[CONFIDENTIAL]
4-53