Filter
Top Products
TL-WA750RE
150Mbps Universal WiFi Range Extender User Guide
11
Firmware Version - This field displays the current firmware version of the Range Extender.
Hardware Version - This field displays the current hardware version of the Range Extender.
Connection Status to Existing Network - This part shows you the current information of the
root wireless network which the device is connecting to.
Main Router/AP WiFi Network Name (SSID) - It shows the name of the wireless
network which your device is connecting to.
Signal - It shows the root wireless network's signal strength that the device has received.
Connection Status - It shows whether your device has been connected to a wireless
network currently. "Connected" means the range extender have connected to a wireless
network, while if it shows "disconnected", you can click "Connect" to connect.
Wired - The following is the information of Wired LAN. You can configure them in the
Network page.
Range Extender MAC Address - The physical address of the system, as seen from the
Network -> LAN page.
Range Extender IP Address - The IP address of the wired LAN.
Subnet Mask - The subnet mask associated with IP address.
Wireless - These are the current wireless settings or information of the device. You can
configure them in the Wireless -> Wireless Settings page.
Operation Mode - Indicates the mode which the device is working on. "Disable" means
the wireless radio has been turned off.You can configure it in the Wireless -> Wireless
Settings page.
Range Extender WiFi Network Name (SSID) - The Device's wireless network name
(also called SSID) which your PC or other device can be connected to.
Channel - The current wireless channel in use.
Mode - The current wireless mode which the AP works on.
Channel Width - The bandwidth of the wireless channel.
Wireless Rate - It shows the current wireless rate between the range extender and your
PC or other devices which are connected to the it.
Traffic Statistics - The system traffic statistics.
Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless.
Sent (Packets) - Traffic that counted in packets has been sent out from wireless.
Received (Bytes) - Traffic that counted in bytes has been received from wireless.
Received (Packets) - Traffic that counted in packets has been received from wireless.
System Up Time - The length of the time since the device was last powered on or reset.
Click the Refresh button to get the latest status and settings of the device.