Filter
Top Products
TL-WA750RE
150Mbps Universal WiFi Range Extender User Guide
14
4.4 Network
The Network option allows you to customize your local network manually by changing the default
settings of the Range Extender.
Figure 4-5 Network Menu
Selecting Network > LAN will enable you to configure the IP parameters of Network on this page.
Figure 4-6 LAN – Smart IP (DHCP)
Figure 4-7 LAN – Static IP
MAC Address - The physical address of the LAN port, as seen from the LAN. The value
cannot be changed.
Type - Several IP types are supported, including: (1) Static IP; (2) Smart IP (DHCP), and they
are explained below.
Static IP - In this type, you can configure IP Address/Gateway manually.
Smart IP (DHCP) - In this type, if your Range Extender have connected to a router, your
client will dynamically get an IP Address/Gateway from the router, otherwise the client
will get a IP Address/Gateway in the same network as you set below. And this type is
recommended.
IP Address - Enter the IP address of your Range Extender in dotted-decimal notation (factory
default setting is 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.