Filter
Top Products
Archer C2 AC750 Wireless Dual Band Gigabit Router
- 62 -
Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.
Allow Guest To Access My USB Storage Sharing - If enabled, guests can access to USB
storage sharing servers.
Guest Network Isolation -. If enabled, guests are isolated from each other.
Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules
will take effect.
Band Select/Guest Network – Select the wireless network band (2.4G/5G) and enabled or
disable its Guest Network function.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
Max Guest number – The maximum of guests at the same time,
Security - You can configure the security of Guest Network here.
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.9 DHCP
Figure 4-44 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-44): DH
CP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding functions.
4.9.1 DHCP Settings
Choose menu “DHCP → DHCP Settings”, you can configure the DHCP Server on the page as
shown in Figure 4-45.The router is set up by default as a D
HCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.