TL-SF2226P+/TL-SL2226P+ Remote Smart Switch User Guide
Figure 6-16
2) Network Config
Network Config interface is as follows, you can change the switch's IP, gateway, you can
not change the switch's MAC address.
Figure 6-17
Press w or s key to move cursor, press space to edit the switch's IP address, Default
gateway. Input the new IP address and gateway, press enter. If you input a valid IP or
gateway, you will get an error message. If you want to save the configuration, press ctrl +
s and the switch will restart.
Make sure that the network configuration is correct before you save it. If you don't want to
save it, press Esc to quit.
- 31 -