Filter
Top Products
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 37 -
Figure 5-13 Wireless Settings (2.4GHz)
Wireless Network Name - The wireless network name (SSID) that the router uses. You can
create a new one with up to 32 characters. The default SSID is set to be TP-LINK_XXXX.
This value is case-sensitive. For example, TEST is NOT the same as test.
Region - The geographic region where the router is being used. This field specifies the
region where the wireless function of the router can be used. It might be illegal to use the
wireless features of the router in some parts of the world. If your country or region is not
listed, please contact your local government agency for assistance.
Mode - Select the desired mode.
11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It
is strongly recommended that you set the Mode to 802.11bgn mixed, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the router.
Channel Width - Select the channel width from the drop-down list. The default setting is
40MHz.
Note:
If 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey
and the value will become 20MHz, which is unable to be changed.
Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.