Filter
Top Products
TL-WPA4220/TL-WPA281 300Mbps AV500/AV200 WiFi Powerline Extender
27
3.6.2 Factory Defaults
Selecting S
ystem Tools > Factory Defaults allows you to restore the factory default settings for the
device on the screen shown in Figure 3-25.
Figure 3-25 Restore Factory Defaults
Click Restore to reset all configuration settings to their default values.
• Default User Name: admin
• Default Password: admin
• Default IP Address: 192.168.1.1
• Default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
3.6.3 Backup & Restore
Selecting S
ystem Tools > Backup & Restore allows you to save all configuration settings to your local
computer as a file or restore the device's configuration on the screen shown in Figure 3-26.
Figure 3-26 Save or Restore the Configuration
Click Backup to save all configuration settings to your local computer as a file.
To restore the device's configuration, follow these instructions:
• Click Browse… to find the configuration file which you want to restore.
• Click Restore to update the configuration with the file whose path is the one you have input or
selected in the blank.
)
Note:
1. The current configuration will be covered with the uploading configuration file.
2. Wrong process will lead the device unmanaged.
3. The restoring process lasts for about 20 seconds and restarts automatically. Do not power off the
device during the process to avoid any damage.