Filter
Top Products
TD-8616 ADSL2+ Modem User Guide
15
4.2 Basic Setup
Choose “Basic Setup”, you can see the next submenus: WAN Setting, LAN Setting and ADSL.
Click any of them, and you will be able to configure the corresponding function.
Figure 4-4
4.2.1 WAN Setting
Choose “Basic Setup→WAN Setting” menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-5).
Figure 4-5
WAN Setting: WAN settings are used to connect to your ISP. Your ISP provides VPI (Virtual
Path Identifier) and VCI (Virtual Channel Identifier) settings to you. In this Device, you can
totally set up 2 VC(Virtual Circuit)s on different encapsulations, if you apply 2 different virtual
circuits from your ISP. You need to activate the VC to make it take effect.
Virtual Circuit: Select the VC number you want to setup, PVC0~PVC1.
PVC Summary: Click PVC (Permanent Virtual Circuit) Summary button and Figure 4-6
will display. Two items of VC information have been entered into the Modem to si
mplify
your operation. You can use it directly without any configuration.