Filter
Top Products
TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
54
4.5.2.2 MAC Filter
Select I
P/MAC Filter as the Filter type, and select MAC as the Rule type (shown in Figure 4-40),
and then you can configure the filter rules based on MAC address.
Figure 4-40
If you select Next, the modem router will find the
the information about the MAC Filter rules.
Presume the rules are
(1, 2).
Step 1: Select the “IP/MAC Filter” as the Filter Type Selection:
Rule Type: Select MAC for the MAC Filter rule.
Active: Select “Yes” to make the rule to take effect.
MAC Address: Enter the MAC address for the rule.
Rule Unmatched: If the current rule can not match, and you select Forward, the modem
router will skip the rule and transmit directly.
next filter rule (show in Filter list) to match.
IP/MAC Filter Listing: This displays
To add a MAC Address filtering entry:
For example: If you want to block the PCs with MAC addresses 00:0A:EB:00:07:BE and
00:0A:EB:00:07:5F to access the Internet, you can configure as follows.
both aimed at the interface PVC0, and their indexes are (1, 1) and