Filter
Top Products
TL-PA4030 AV500 3-port Mini Powerline Adapter
22
Join an existing Powerline AV Network:
Powerline adapter A and Powerline adapter B form a HomePlugAV Network, Powerline adapter C
wants to join this network.
Step 1. Press and hold the Pair button on Powerline adapter C for 1 second.
Step 2. Within 2 minutes, press and hold the Pair button on Powerline adapter A/B for 1 second.
Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power
LEDs on Powerline adapter A/B and C will stop flashing and become solid light when the
connection is made.
) Note:
The sequence of Step 1 and Step 2 can be exchanged.
Leave an existing Powerline AV Network:
As the figure above shown, Powerline adapter A, B and C have formed a HomePlugAV Network.
The user wants to remove one device (Powerline adapter A) from this network.
Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline
adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily
extinguish during resetting, flash during restarting, and then illuminate steadily.)
Step 2. Wait for the reset to complete.