Filter
Top Products
Port-based Priority Setting
Port: Select the desired port to configure its priority queue. It is
multi-optional.
Priority Queue: Specify the priority queue the packets from the port are mapped
to. The priorities are labeled as 1~4 and among them the bigger
the value, the higher the priority.
6.2 Bandwidth Control
Bandwidth control functions to control the ingress/egress traffic rate on each port via configuring
the available bandwidth of each port. In this way, the network bandwidth can be reasonably
distributed and utilized.
On this page you can configure and view the bandwidth control function information.
Choose the menu QoS→Bandwidth Control to load the following page.
Figure 6-5 Bandwidth Control Setting
32