Chapter 23 MLD Snooping Commands
MLD Snooping (Multicast Listener Discovery Snooping) is a multicast control mechanism running
on Layer 2 switch. It can effectively prevent multicast groups being broadcasted in the IPv6
network.
ipv6 mld snooping
Description
The ipv6 mld snooping command is used to enable MLD Snooping function
globally. If this function is disabled, all related MLD Snooping function would not
work. To disable this function, please use no ipv6 mld snooping command.
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Command Mode
Global Configuration Mode
Example
Enable MLD Snooping:
TL-SG2424(config)# ipv6 mld snooping
ipv6 mld snooping router-aging-time
Description
The ipv6 mld snooping router-aging-time command is used to specify router
port aging time globally. The default aging time is 260 seconds. To restore the
default timer, please use no ipv6 mld snooping router-aging-time command.
Syntax
ipv6 mld snooping router-aging-time timer
no ipv6 mld snooping router-aging-time
Parameter
timer —— Specify the aging time in seconds, ranging from 1 to 1000.
Command Mode
Global Configuration Mode
169