TP-Link TL-SG2424P Switch User Manual


 
Example
Specify MLD Snooping router port aging time as 100 seconds globally:
TL-SG2424(config)# ipv6 mld snooping router-aging-time 100
ipv6 mld snooping member-aging-time
Description
The ipv6 mld snooping member-aging-time command is used to specify
member port aging time globally. The default aging time is 260 seconds. To
restore the default timer, please use no ipv6 mld snooping
member-aging-time command.
Syntax
ipv6 mld snooping member-aging-time timer
no ipv6 mld snooping member-aging-time
Parameter
timer —— Specify the aging time in seconds, ranging from 200 to 1000.
Command Mode
Global Configuration Mode
Example
Specify MLD Snooping member port aging time as 100 seconds globally:
TL-SG2424(config)# ipv6 mld snooping member-aging-time 100
ipv6 mld snooping report-suppression
Description
The ipv6 mld snooping report-suppression command is used to enable the
Report message suppression function. By default, it is enabled. To disable this
function, please use no ipv6 mld snooping report-suppression command.
Syntax
ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Command Mode
Global Configuration Mode
Example
Disable Report message suppression function:
TL-SG2424(config)# no ipv6 mld snooping report-suppression
170