Filter
Top Products
15
Gigabit Uplink Unmanaged Switch
Please connect the Ethernet ports of the switch to the network devices by RJ45 cable
as the following figure shown.
RJ45 Port
RJ45 Cable
Figure 4-1 Connecting the RJ45 Port
Connect the SFP port to a SFP module. The switch could identify and configure the SFP
module automatically (for TL-SL1351 only).
SFP Module
SFP Port
Figure 4-2 Inserting the SFP Module
After completing the installation, please verify the following items:
There are 5~10cm of clearance around the sides of the device for ventilation and
■
the air flow is adequate.
The voltage of the power supply meets the requirement of the input voltage of the device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network device.
■
Connection