Filter
Top Products
TL-WN620G 108M Wireless USB Adapter User Guide
3.2.6 Scan Available Networks
1. Click Scan on Profile Management, the Available Infrastructure and Ad Hoc
Networks window will appear.
2. Click Refresh to refresh the list at any time.
3. Highlight a network name and click Activate to connect to an available network. If
no configuration profile exists for that network, the Profile Management window will
open the General tab. Fill in the Profile name and click OK to create the
configuration profile for that network.
Figure 3-10 Scan Available Networks Dialog
3.2.7 Auto Profile Selection Management
The auto selection feature allows the wireless adapter to automatically select a profile
from the list of profiles and use it to connect to the network. To add a new profile into the
Auto Selected Profiles list, please follow these steps.
1. On the Profile Management tab, click Order Profiles….
2. The Auto Profiles Selection management window will appear, with a list of all
created profiles in the Available Profiles box.
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will
appear in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate.
Note: The first profile in the Auto Selected Profiles box has highest priority, and the
last profile has lowest priority.
6. Click OK.
7. Check the Auto Select Profiles box on the Profile Management tab.
Note: When auto profile selection is enabled by checking Auto Select Profiles on the
Profile Management tab, the client adapter will scan for an available network. The
profile with the highest priority and the same SSID as one of the found networks will be
used to connect to the network. If the connection fails, the client adapter will try the next
highest priority profile that matches the SSID until an available network is found.
- 15 -