Filter
Top Products
18 HARDWARE INSTALLATION
2.4.6 Wake-on-LAN Connector (3-pin WOL)
This connector connects to LAN cards with a Wake-on-LAN output. The system can be Powered
Up when a wake-up packet or signal is received from the LAN card.
NOTE: This function requires that the “Wake-Up by PCI & WOL” function in the “Power
Management Setup” is set to “Enabled” and that your system has an ATX
power supply with at least 720mA +5V standby power.
+5V Standby
Wake-on-LAN Connector
GND
PME
WOL
DIMM1
(
64bit 168pin SDRAM Module
)
DIMM2
(
64bit 168pin SDRAM Module
)
PCI Slot1 (PCI1)
PCI Slot2 (PCI2)
PCI Slot3 (PCI3)
CPU-FAN
WOL
FDC
IDE2
IDE1
GMCH
COMB
AC97
IntelICH
66/100MHz
Pin1
COMA
VGA
Parallel Port
Game Port
Line
_
in
MIC
Line
_
out
Li Batter
y
Transcend