Filter
Top Products
28 BIOS SETUP
• IDE HDD Auto-Detection: Detect the HDD on this channel. If the detection is
successful, it fills the remaining fields in this menu.
• IDE Primary/Secondary Master/Slave: We recommand that you select “AUTO” for all
drives. The BIOS can automatically detect the specifications during POST while the
system boots. You can also choose “Manual” to set the specifications yourself. As to
“None”, it means there is no device installed on this IDE channel.
• Access Mode : “Normal”, “LBA”, “Large”, or “Auto”.
- Normal: Maximum number of cylinders, heads, and sectors supported are 1024,
16, and 63 respectively.
- LBA (Logical Block Addressing): During drive access, the IDE controller transforms
the data address described by sector, head, and cylinder number into a physical
block address. This significantly improves data transfer rates for drives with
more than 1024 cylinders.
- Large: For drives that do not support LBA and have more than 1024 cylinders.
- Auto: The BIOS automatically determines the optimal access mode.
• Capacity: Disk drive capacity. Note that this size is slighty greater than the size of the
formatted disk given by a disk-checking program.
• Cylinder: Number of cylinders
• Head: Number of heads