Filter
Top Products
Transition Networks SISTF1010-150-LR(T) Industrial Unmanaged Switch
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
10
Wall mounting
Wall mount
bracket
The Industrial Switch includes a wall mount bracket and screws in the contents of the shipping
package. The wall mount bracket can be attached to the rear panel of the Industrial Switch to
enable mounting to a vertical surface such as the wall of an enclosure. Locate the bracket (1)
and screws (6) and follow the steps below to install the bracket on the Industrial Switch.
Wall mount
bracket install
To install the wall mount bracket to the Industrial Switch, see Figure 6 and do the following:
Step Action
1. Remove existing screws (3) and DIN-Rail bracket from rear of Industrial Switch.
2. Locate wall mount bracket and screws (6) from Industrial Switch packaging.
3. Place bracket in correct orientation as shown and insert and tighten screws to
secure bracket to rear of Industrial Switch.
4. Mount assembled device to a wall per locally accepted practices for anchoring
and securing. (Wall mount screws not included.)
Figure 6: Installing wall mount bracket to Industrial Switch
Remove screws and
DIN rail bracket
Locate wall mount
brackets and screws
1
2
3
Screw bracket onto rear
of Industrial Switch