Filter
Top Products
SNMP Setting: Enable or Disable the SNMP function on the Web
Smart Switch.
Community Setting: In support of SNMP version 1, the Web-Smart
Switch accomplishes user authentication by using Community
Settings that function as passwords. The remote user SNMP
application and the Switch SNMP must use the same community
string. SNMP packets from a station that are not authenticated are
ignored (dropped).
Read_Only: The community with read-only privilege allows
authorized management stations to retrieve MIB objects. (Default:
public)
Read_Write: The community with read/write privilege allows
authorized management stations to retrieve and modify MIB objects.
(Default setting: private)
Trap Setting: Enable or Disable the Trap function on the Web Smart
Switch.
Traps are messages that alert network personnel of events that occur
on the Switch. Such events can be as serious as a reboot (someone
accidentally turned the Switch OFF), or less serious events such as a
port status change. The Switch can generate traps and send them to the
trap recipient (i.e. network administrator).
Trap Name: Enter a Trap Name (i.e. Trap Name must be selected
from a Community Name)
IP: Enter the IP of the device to be monitored, and choose the event(s)
to trap.
Event: The available trap Events to choose from include: System
Device Bootup, Fiber Link Up / Link Down, Fiber Abnormal
Receive Error, Fiber Abnormal Transmit Error, Twisted Pair Link
Up / Link Down, Twisted Pair Abnormal Receive Error, Twisted
Pair Abnormal Transmit Error.
44