Filter
Top Products
User’s Guide
11
4.2. System
AP Password: Changing the password for the AP is as easy as typing the password into the Enter
New Password field. Then, type it again into the Re-enter to confirm.
* Click the Apply button to save the setting.
Use the default password when you first open the configuration pages, after you have configured
these settings, you should set a new password for the AP (using the Password screen). This will
increase security, protecting the AP from unauthorized changes.
Restore Factory Defaults: Click the Yes button to reset all configuration settings to factory default
values. Note: Any settings you have saved will be lost when the default settings are restored. Click the
No button to disable the Restore Factory Defaults feature.
Click the Apply button to save the setting.
Backup/Restore Setting: Click Backup to store the Access Point’s configuration on your local PC.
Click Restore to restore Access Point’s configuration from your local PC
* Check all the settings and click Apply to save them.