Filter
Top Products
19. To use WEP security, select WEP and click Next button. Select 64-bit or 128-bit WEP
key length, and enter your WEP key. For 64-bit encryption, enter 10 hexadecimal
characters, For 128-bit encryption, enter 26 hexadecimal characters. Click Next to continue
the setting. To use WPA-PSK security, select WPA-PSK and click Next button. Select WPA
Mode: WPA Only, WPA2 Only, WPA or WPA2, and set Pre-Shared Key by entering 8 ~
63 characters. Click Next to continue the setting.
20. Confirm your new settings. It is recommended that you save or print your wireless
settings with the Save or Print buttons. Once finished, click Next to continue.
Page 13