English
4
Note: The example below is for WPA2-PSK security. If you select WPA-PSK
or WPA2-PSK, make sure your wireless adapters support WPA2 or WPA. If
your wireless adapters do not support WPA or WPA2, then select WEP.
5. Click Wireless and then click
Basic. Enter the desired Wireless
Name (SSID) and then click Apply.
The default Wireless Name (SSID)
is TRENDnet639.
6. Select the desired WPA mode,
enter characters for your Pre-
Shared key and then click Apply.
For WPA-PSK or WPA2-PSK, the
Pre-Shared Key must be between
8 and 63 ASCII or 64 HEX
characters. Make sure to copy
down the Pre-Shared Key.