Filter
Top Products
2
UNPACKING AND SETUP
This section provides unpacking and setup information for the Wireless N CardBus
Adapter.
Unpacking
The box should contain the following items:
One IEEE 802.11n Wireless LAN CardBus Adapter or PCI Adapter
One Driver & Utility CD-ROM
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
z Visually inspect the PCI Adapter and make sure that it is fully plugged in to the
PCI slot. (TEW-641PC)
z Visually inspect the CardBus Adapter and make sure that it is fully plugged in
to the PCMCIAI slot. (TEW-643PI)
The operating system on your computer must be the following: Windows 2000
(Service Pack 4), XP (Service Pack 2), Windows Vista
A draft 802.11n or 802.11b/g access point.
Make sure the environment has minimal interference and obstructions.