TRENDnet TEW-647GA Network Card User Manual


 
11
Q5:
A5:
Q6:
A6:
Q8
I connect the TEW-647GA to my game console, but I am unable to play games
online. What should I do?
First, verify that a computer can get online through the router wirelessly.
Second, verify that the network setting on your game console is set to obtain an IP
address automatically (dynamic IP). Please refer to the manual or contact your
game console's technical support for instructions. Third, power cycle the
TEW-647GA and your wireless router. Unplug the power to the TEW-647GA and
your wireless router. Wait 15 seconds, then plug the power to your wireless router
back in. Wait 15 seconds, then plug the TEW-647GA back in. Fourth, factory
reset the TEW-647GA. To reset the TEW-647GA, take a pin or paper clip and
press the reset button for 15 seconds, then let go.
I followed the Quick Installation Guide and setup a new password. When I log
in to the browser configuration an access error message appears. What should I
do?
The default user name is admin. When you log in to the browser
configuration for the first time, make sure to enter admin for user name. Do not
leave the user name field blank. If the password was changed and you don't
remember it, you need to reset the TEW-647GA. To reset the TEW-647GA, take a
pin or paper clip and press the reset button for 15 seconds, then let go.
Do I need a gaming console in order to use this device?
This device is compatible with any Ethernet-enabled device.
: Is WPS required on my router in order to use the TEW-647GA?
A router with WPS is not required. You will need to use the wizard. When you
run the wizard, you will need to select Manual Setup, instead of Wi-Fi Protected
Setup (WPS). Manual Setup allows you to select the following encryption type:
WEP, WPA-PSK and WPA2-PSK. For detailed instructions, see section 2.2
Manual Setup.
If you still encounter problems or have any questions regarding the TEW-647GA, please
contact TRENDnet's Technical Support Department.
Q7:
A7:
A8: