Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
6
Note:
1. To protect your network from any unauthorized access it is recommended to enable
wireless encryption.
2. The examples below are for WPA2-PSK security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your
wireless adapters do not support WPA or WPA2, then select WEP.
4. Click Next.
5. Select AP Mode and then click Next.
6. Use your mouse to select the desired security
level (lowest for no encryption, highest for
WPA2-PSK).
7. Enter the desired SSID and Key. Then click
Next. By default, the SSID is TRENDnet653.
8. Setup is successful. Click Reboot.