TRENDnet TEW-654TR Network Router User Manual


 
Second, change the hardware switch on the bottom of the TEW-654TR to AP or
Client. Third, connect the provided Ethernet cable from the Ethernet port on your
computer to the Ethernet port on the TEW-654TR. Fourth, connect the power
adapter into the TEW-654TR and plug the power adapter into an available power
outlet. Fifth, open up your browser and enter http://654TR(AP Mode),
http://654TR-client (AP Client mode) or http://192.168.10.100 into the address bar.
Sixth, refer to the User Guide for additional instructions. The User Guide is on the
User Guide CD-ROM drive.
12
2. Click Internet Protocol (TCP/IP) and
then click Properties. Then click on
Use the following IP address, and
make sure you assign your network
adapter an IP address in the subnet of
192.168.10.x.
If you still encounter problems or have any questions regarding the TEW-654TR,
please contact TRENDnet's Technical Support Department.