Filter
Top Products
2. Install Hardware
English
2
Note: Because the TFU-430 is hot-pluggable, you can connect or disconnect
the TFU-430 while the computer is on. Although the TFU-430 is bus-powered
and therefore does not require an AC Power Adapter, it is recommended that
the included AC Power Adapter be used.
3. Connect the included USB Cable
to the Uplink Port, and then to
your computer's USB port.
2. Connect the AC Power Adapter to
the USB Hub.
4. Connect the included IEEE 1394
FireWire Cable to the TFU-430,
and then to your computer's IEEE
1394 FireWire port.
5. Connect USB and FireWire
devices to the remaining ports.
Your installation is now complete.
1. Turn on your computer and wait
until startup completes.