Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
4
Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave switch
because this will initialize only the switches downstream from this slave switch.
10. Turn ON the connected computers one-by-
one and wait until each computer's desktop
appears.
Rack Mount
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment.
Note: If you would like to mount the KVM switch to a EIA 19” equipment rack, install the
included mounting brackets to the sides of the KVM switch, secure them with the screws
provided, and then mount the KVM switch to the equipment rack with the hardware
provided by the equipment rack manufacturer.
11. Attach the mounting brackets to both sides of
the switch and secure them with the provided
screws.
12. Carefully position the switch onto the rack.
Align the bracket to the screw holes on the
rack, then use the screws provided with the
equipment rack to mount the switch.
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet.