Filter
Top Products
Powerline Utility
© Copyright 2013 TRENDnet. All rights reserved.
17
TPL-4052E User’s Guide
Private Network Name
This is the network name of your
powerline network. Default is
“HomePlugAV”. When network name
set to “HomePlugAV”, it considered
a public network because very out of
box Powerline Adapter can join this
network. Powerline Adapters connect
to each other only when network
name is the same� Change network
name and make your network private
is recommended to increase your
privacy.
You have to remember your network
name (Private Network Name). It will
be encrypted and save to device. Even
Powerline Ulity cannot read it in plain
text again. When you visit this Private
Sengs again and the Private Network
Name show UnknownNetworkName, it
means the network name is private.
Use Default
If you don’t remember what network
name you set previously, you can set
the network public. Then set it back to
private later.
Set Local Device
Change network name on device
selected above.
Set Remote Devices
All devices currently connected locally to
your computer or connected remotely
through powerline network will set to
the new network name�
Mulcast Address
Click this buon to synchronize mulcast
address on all adapters on same
powerline network.
Powerline Ulity - Device Setup