Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
3
Note:
1. Must use the daisy chain cable provided with the KVM switch
2. Only daisy chain the KVM switch with another TK-802R
3. Stackable up to 16 KVM switches
Daisy-Chain
9. Press Port 1 button on the first (master) switch
for 3 seconds to initialize the daisy chain.
6. Connect one end of the daisy-chain to the
Daisy chain in port on the first (master) KVM
switch.
7. Connect the opposite end of the daisy-chain
cable to the Console port on the second
switch (slave1)
8. If you have a third KVM switch, connect one
end of the daisy chain to the Daisy chain in
port on the second KVM switch (Slave 1). Then
connect the opposite end of the daisy-chain
cable to the console port on the third switch
(Slave 2). Repeat for each additional switch.
slave1
Master
slave2