Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
6
Hot Key Commands
A keyboard hot key command consists of at least three keystrokes:
Hot Key command = Scroll Lock + + Command key(s)
After pressing the key, you have 2 seconds to press the Scroll Lock key
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port
Scroll Lock
Scroll Lock
For example, to select port 1, hit the following key sequence:
Select PC =
Select PC =
Select PC =
Port numberBank number
th
For example, to select port 8 of the 10 KVM switch on a series of daisy chained
TK-802R's you hit the following key sequence:
Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock
Scroll Lock
+
+
A
+
B
+
Y
+
Z
Scroll Lock
Scroll Lock
+
+
0
+
1
+
0
+
1
Scroll Lock
Scroll Lock
+
+
1
+
0
+
0
+
8