Filter
Top Products
12
Reset:
The Reset button is to reset all the setting back to the factory default.
Note: Please make sure you write down the setting information of
before pressing “Reset” button; otherwise all the setting will be
erased
Rear Panel
The rear panel of the Switch consists of an AC power connector. The
following shows the rear panel of the Switch
Figure 5. Rear panel of the Switch
AC Power Connector:
This is a three-pronged connector that supports the power cord. Plug
in the female connector of the provided power cord into this connector,
and the male into a power outlet. Supported input voltages range from
100-240V AC at 50-60Hz.