Filter
Top Products
26
Speed/Disable:
This setting has six modes—100M Full, 100M Half, 10M Full, 10M
Half, Auto and Disable—for speed or port disable selections.
Flow Control:
This setting determines whether or not the Switch will be handling
flow control. Set Flow Control to Enable for avoiding data transfer
overflow. Or it sets to Disable; there is either no flow control or other
hardware/software management.
When the port is set to forced mode, then the flow control will
automatically set to Disable.
QoS:
In some ports that need to have a high priority to manage the data
transfer, QoS should be change. Set the port’s QoS to high to
determine the port will always transfer their data first.
VLAN Settings (IEEE 802.1Q VLAN)
A VLAN is a collection of switch ports that make up a single
broadcast domain. You can configure a VLAN for a single switch, or
for multiple switches. When you create a VLAN, you can control
traffic flow and ease the administration of moves, adds, and changes
on the network, by eliminating the need to change physical cabling.
On VLAN settings, there are two main settings, VID Table Setting
and Port VLAN Setting.
VID Table Setting: Select the VID group that you set.
When you select VID Table Setting, press “Add new VID” to create
new VID group, from port 01 ~ port 48 (48F), check on the port to be
a member to this VLAN Group, and press “Apply” button to save the
setting. To remove the selected VID group, select the VID group and