Filter
Top Products
Please remember that TRENDware wireless devices are pre-configured to connect
together, right out of the box, with the default settings.
1
1
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Configure TEW-310APB. Refer to the Quick Installation Guide for
setting up the Access Point.
If you already have a DHCP server (e.g. Internet Router) on the
network, please disable the DHCP Server function on the TEW-310APB.
If you are connecting a desktop computer in your network, you
can install the TRENDnet TEW-303PI wireless PCI adapter into
an available PCI slot. See the Quick Installation Guide included
with the TEW-303PI
If you are connecting a Notebook computer in the network, install
the drivers for the TEW-301PC wireless CardBus adapter into the
laptop computer. See the Quick Installation Guide included with
TEW-301PI for installation instructions.
After the configuration, connect the Access Point to your network.
If you have an Internet Router, connect it to the cable/DSL
Note:
Please refer to the following sections
of this manual for additional
information about setting up a
network:
Networking Basics- learn how to
check your IP Address; share printers
and files.
Using the Configuration Utility-
learn the settings you must use on
each computer in your network for
successful communication.
Troubleshooting learn how to check
for the proper installation of the
network adapters' drivers and other
tips for troubleshooting the network.
2
2
3
3
4
4
5
5
Setting Up an Infrastructure Network
6
6
11
Fig. 4.1