Filter
Top Products
2. The wireless client cannot access the Internet in the
Infrastructure mode.
· Make sure the wireless client is associated and joined with the correct
Access Point. To check this connection: Right-click on the Local
Area Connection icon in the taskbar> select View Available Wireless
Networks. The Connect to Wireless Network screen will appear.
Please make sure you have selected the correct available network, as
shown in the illustrations below.
You could also check the associated Access Point by using your
Wireless Adapter's Utility program.
· Check that the IP Address assigned to the wireless adapter is within
the same IP Address range as the access point and gateway. Since
the TEW-310APB has an IP Address of 192.168.1.1, wireless
adapters must have an IP Address in the same range, e.g.,
192.168.1.x. Each device must have a unique IP Address; no two
devices may have the same IP Address. The subnet mask must be the
same for all the computers on the network.) To check the IP Address
assigned to the wireless adapter, double-click on the Local Area
Connection icon in the taskbar > select the Support tab and the IP
Address will be displayed. (Please refer to Checking the IP Address
in the Networking Basics section of this manual.)
· If it is necessary to assign a Static IP Address to the wireless adapter,
please refer to the appropriate section in Networking Basics. If you are
entering a DNS Server address you must also enter the Default
Gateway Address.
21
Fig. 6.2