Filter
Top Products
English
4
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click IP
Setup.
3. Configure the Internet Camera
Note: It is recommended that you configure the Internet Camera from a wired
computer. Since the Internet Camera's default IP address is 192.168.10.30,
make sure no other network devices are assigned an IP address of
192.168.10.30.
3. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
2. Follow the Installation Wizard
instructions and then click Close.
4. Select the Internet Camera and
click Change IP.