Filter
Top Products
4
Note:
By default, the IP setting on the TV-IP410WN is set to DHCP. If you want to give the
TV-IP410WN a static IP address, please refer to the User's Guide on the Utility
CD-ROM.
Note:
If you plan on keeping the TV-IP410WN wired to your router, please skip to step 16. If
you plan on connecting the TV-IP410WN wirelessly to your router, continue on to step 12.
9. Enter the User name and Password, and then
click OK. By default:
User Name: admin
Password: admin
10. Right click on the information bar and click
Install This Add-on for All Users on This
Computer… (Internet Explorer 8) or click
Install ActiveX Control (Internet Explorer 6/7).
11. Click Install (Internet Explorer 6/7/8).
8. Double click the IP Camera to access the
browser configuration. Verify that the MAC
address listed matches the MAC address on
your IP camera. The MAC address is listed on
the bottom of the TV-IP410WN. Click Search if
no cameras are detected.