Filter
Top Products
9
7. After I successfully configured the TV-IP612W to match my wireless network settings, I
can not connect to the camera.
1. Verify that the wireless settings match your wireless network settings.
2. Verify in the wireless section of the browser configuration that the Enable option
is checked.
3. Make sure to disconnect the Ethernet cable from the camera and verify that the
LINK LED is blinking red.
8. I forgot my password. What should I do?
Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults. Open up the SetupWizard program to find
out the IP address of the camera (see step 11 in Section 2: Hardware Installation and
Configuration. If you do not have a DHCP server on your network, the default IP address is
192.168.10.30. The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP612WN, please contact
TRENDnet's Technical Support Department.