Filter
Top Products
5
17. Select your wireless network from the
Available AP dropdown list. If your wireless
network does not appear, manually enter the
SSID of your wireless network. If you have
Encryption enabled, select the Authentication,
select the Encryption and enter your Key.
Then click Next.
18. Click Next.
19. Please wait while the settings on your cameras
are being saved.
20. Select By using wireless and then click Next.
21. Disconnect the RJ-45 cable. Verify that the
LINK (RED) LED is lit and then click Next.
Note: The TV-IP612WN will not work wirelessly until you disconnect the Ethernet cable
from the back of the camera.