Filter
Top Products
I206 V.92 PCI MODEM USER’S MANUAL
Rev.1.00.2.1.57.75 - 7 -
Section 2.3.3 Setup instructions for Windows Me
STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect your new added devices “PCI Card”.
A prompt screen will ask you to select Automatic search for a better driver or Specify the
location of the driver, so you can select the driver you want.
Please select the Specify the location of the driver [Advanced] as shown in figure.
Then click on Next.
STEP 2. And then, a prompt screen will ask you to indicate where your driver is located, floppy disk drives,
CD-ROM drive, Microsoft Windows Update or specify a location: .
Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,
then select Specify a location as shown in figure.
Click on Next.
STEP 3. Then, a prompt screen indicates Windows has found the best driver for your modem as shown
in figure.
Please make sure the source of your driver is correct then click on Next.