Filter
Top Products
1
Package Contents
If any of the above contents are missing, please contact your reseller.
1. Before You Start
2. How to Install
Ÿ
ŸMulti-Language Quick Installation Guide
ŸPower Adapter (5V DC, 1A)
TEG-S8g
System Requirements
1. Connect the Power Adapter to the TEG-S8g and then to a power outlet.
Ÿ
ŸCat.5e or Cat.6 network cable
ŸThe surface must support at least 245g for the Switch
ŸThe power outlet should be within 1.82 m (6 ft) of the switch
ŸVisually inspect the DC power jack to make sure that it is securely
connected to the power adapter
ŸMake sure that there is proper heat dissipation from and adequate
ventilation around the Switch
ŸDo not place heavy objects on the switch
Computer with network adapter installed